If you’ve ever installed a ThunderJet®, you know the biggest challenge is the setup - getting the carburetor body to just the right angles to drill the holes. These fixtures take the hassles out of setting up to install the ThunderJet® by clamping the components at the correct angles for installation in a drill press or mill. If you install ThunderJets®, this tool will quickly pay for itself in time saved.
Installs in place of the spark plug and allows cranking compression test. Test should be performed with both plugs removed and grounded, throttle held wide open. American made gauge includes 12, 14 and 18mm plug adapters.
Check availability before ordering? Please click on Contact Us to send an email, Contact Us, click here.
Use this dual-gauge unit to troubleshoot cylinder leak issues including valve, ring and gasket seal leaks. Includes 10, 12 14 and 18mm plug adapters for all H-D® engine applications and others.
Check availability before ordering? Please fill out the form below and we will get back to you as soon as possible, during business hours.
Twin Scan diagnostic scan tools from Daytona Twin Tec can be used to read and clear trouble codes from the factory ECM, ABS, speedo and TSM/TSSM, bleed ABS brakes, view live engine parameters and data-log up to an hour of engine data while logging trouble codes to help diagnose running disorders.
A healthy EFI system relies on consistent fuel pressure - one of the first things you should check if performance degrades. Use this tool to verify your system reaches and holds proper operating fuel pressure. Installs in-line at the fuel tank quick-connect junction.
Thread chasers are used to ensure threaded holes are free of burrs or previously applied thread locking agents so proper torque is applied during re-assembly. Unlike thread cutting taps, chasers do not remove parent material from the threaded holes. Set of 6, sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, 9/16-12.
