Red Line® Assembly Lube is a high protection lubricant that clings to metal surfaces. Designed to be used as a lubricant applied to potential wear surfaces before assembly, in order to prevent metal contact upon startup before adequate lubrication is supplied. Provides three times greater film strength than conventional black Molybdenum Disulfide greases and will not clog oil filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing the storage of parts for years. A thin film of protection is all that is required on mating parts. Red Line® Assembly Lube is an excellent corrosion inhibitor and can be used on machined surfaces to provide long-term corrosion protection. Do not use on exhaust bolts or other high temperature bolts which require an anti-seize.
Red Line® Assembly Lube is available in a 4oz tub, 1/2oz mini jar, or 12oz squeeze bottle.
Red Line® Synthetic CV-2 Grease outperforms the best conventional or synthetic greases and lubes. CV-2 Grease withstands extreme temperature and pressure in wheel bearings, U-joints, and high-angle CV Joints. CV-2 Grease offers excellent high-temp stability, extreme-pressure protection, and water resistance, and can be used in a variety of applications with operating temps from -100°F to 500°F. Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals. Contains an organic moly for chassis lubrication and high temp/high speed industrial equipment. Synthetic fluidity allows increases in bearing life up to 200%. Will darken after high-temp use-not detrimental to performance.
Click here for Red Line Oil Product Finder for my vehicle
