This extension harness will allow relocation of the Manifold Air Temperature sensor on ‘95-’05 models to the air cleaner backing plate from behind the throttle plate, where it is susceptible to “heat soaking” from a hot engine.
Stock Manifold Air Temperature (M.A.T.) sensor replacement for 1995-2005 injected Harley-Davidson® models.
**Please note,this item is low in weight and our shipping calculator with UPS has minimums which can create high cost shipping on low weight items. Please email Zipper's, using the form below, so we may explore other carrier options with lower cost than UPS. If you do process the order through our website, we may be in contact with you for other shipping options.
2006-Up Manifold Air Temperature (M.A.T.) sensor for Delphi® injected cable-throttle models . Stock replacement, sold each.
**Please note,this item is low in weight and our shipping calculator with UPS has minimums which can create high cost shipping on low weight items. Please email Zipper's, using the form below, so we may explore other carrier options with lower cost than UPS. If you do process the order through our website, we may be in contact with you for other shipping options.
Important related parts to S&S 'E' and 'G' Carbs. Accessories include air filter elements and throttle cables.
Not legal for sale or use in California on any pollution controlled motor vehicle.
Not legal for sale or use on any EPA pollution controlled motor vehicle.
These universal breather kits can be used to plumb breather lines externally when using a racing style air cleaner assembly. Some fabrication may required for carburetor support with certain air cleaner assemblies.
Fuel Rail fits 2001-2005 Delphi® injected models. Stock replacement, sold each.
**Please note,this item is low in weight and our shipping calculator with UPS has minimums which can create high cost shipping on low weight items. Please email Zipper's, using the form below, so we may explore other carrier options with lower cost than UPS. If you do process the order through our website, we may be in contact with you for other shipping options.
Fuel Supply Tube fits 2001-2005 Delphi® injected models. Stock replacement, sold each.
**Please note,this item is low in weight and our shipping calculator with UPS has minimums which can create high cost shipping on low weight items. Please email Zipper's, using the form below, so we may explore other carrier options with lower cost than UPS. If you do process the order through our website, we may be in contact with you for other shipping options.
This kit includes a plug, bracket and screw for plugging the manifold M.A.P. sensor port when the M.A.P. sensor is not used. Allows use of a Twin Cam® manifold on an Evolution® engine.
Not legal for sale or use in California on any pollution controlled motor vehicle.
Not legal for sale or use on any EPA pollution controlled motor vehicle.
Here’s a handy item for race bike use. Quickly disconnect the fuel line for fast carb removal, gas tank removal or gas check sample. High flow design, for use with 5/16” or 3/8” fuel line. Fuel line sold per foot.
Eases the installation of a velocity stack on an S&S ‘E’ or ‘G’ carb-equipped Evolution® Big Twin engine. Includes velocity stack, enrichener assembly and an adjustable carburetor support bracket that mounts from the bottom manifold bolt to the center case bolt between the cylinders. Choose short (2.5”) or long (4”) velocity stack.
Not legal for sale or use in California on any pollution controlled motor vehicle.
Not legal for sale or use on any EPA pollution controlled motor vehicle.
Got an older (pre-2003) E or G carb on your EV Big Twin bike? This conversion kit contains the parts required to convert the backing plate breather bolts to the newer style, which eliminate the need to remove the breather bolt assemblies when removing the air filter back plate for jetting changes or service.
S&S carburetor service and rebuilt parts. Available individually. Items marked as "high flow" represent larger, higher capacity inlet seat and needle for use in ‘E’ / ‘G’ and ‘B’ carbs (standard issue in ‘D’ carbs). High flow seat must be used with high flow needle #198-197. Recommended for Racing Use Only
Body kits include the parts needed to rebuild the carb body: o-rings, gaskets, throttle shaft, butterfly and throttle return springs. Master rebuild kits include all of the above plus mixture screw, needle/seat and new fasteners; E/G versions include full pump rebuild parts as well. Gasket and o-ring (only) sets available separately.
Now, adding an S&S carb to your bagger doesn’t mean you have to give up your cruise control! These special throttle cable brackets include provisions for factory cruise control cables and quickly attach to any S&S ‘E’ or ‘G’ carb.
Aluminum 1” spacer blocks for S&S carbs. For installations where more clearance is needed; also allows tuner to increase manifold length; useful to control fuel “stand-off”.
Phenolic 1/4” insulator blocks, same as supplied with new S&S E & G carbs. Helps insulate carburetor from engine heat.