One of the less desirable byproducts of increased power is the need for a clutch spring upgrade, and the additional lever effort it requires. By adding the Variable Pressure Clutch (VPC) devise, clutch plate holding pressure is reduced at lower RPM’s, and increased as RPM rises, reducing the chance of clutch slippage as power builds.

The factory system uses a diaphragm spring that applies a constant pressure amount across the RPM range, while the VPC system reduces initial pressure and uses weights and centrifugal force to increase pressure as RPM builds. Clutch lever effort is reduced up to 50% at idle and low RPM, resulting in less hand fatigue, smoother engagement and easy neutral location. Installation is easy (on most Big Twins it can be performed through the derby cover opening!).

Derby covers may require clearancing or Due to its centrifugal nature, lever effort is increased over 4,000 RPM. Some custom may not work with the VPC. Can be used with the stock or Screamin’ Eagle® clutch spring (using SE spring raises torque handling capability). Choose the VPC that best fits your engine’s power output!

v.20131031

Weight 1 lbs
Engine Type

, ,

Customer reviews

Reviews

There are no reviews yet.

Be the first to review “Variable Pressure Clutch (VPC)”

Use one of the allowed file type: jpg,png.