|
ThunderMax EFI Module w/AutoTune
MAXimum Performance from Your EFI
When You Ride, Where You Ride, Every Ride!
Would you like to have full control of your EFI system, freedom to make major or minor adjustments without a master’s degree in electronics and computers? Here is a simple solution—ThunderMax with AutoTune! The ThunderMax is a completely new product that replaces the factory module, not an add-on box or signal modifier. The ThunderMax is purpose-built to deliver uncompromising performance but you don’t have to be a rocket scientist to program it or make adjustments.
Just how easy is it? Installation is a straightforward replacement of the factory module and oxygen sensors*1. The ThunderMax SmartLink software contains hundreds of base maps that cover over 80% of popular factory and aftermarket combinations, dyno-developed by Zipper’s on real motorcycles. Choosing a map is a quick and easy process thanks to SmartLink’s sorting filters; loading a map takes less than a minute. After that, you’re ready to start the motorcycle. Once running, let the bike warm up at idle to operating temperature while the Smartlink software automatically dials in idle and warm-up settings for that particular engine and you’re ready to ride! During your ride, every time you ride, the ThunderMax AutoTune module analyzes the air/fuel ratio read by the wide-band oxygen sensors at warp speed after every cylinder fire and makes any necessary adjustments to the injector pulse width to achieve the desired air/fuel ratio while compensating for variations in injectors, fuel pressure or exhaust flow. With every tank of fuel, at any temperature or elevation. That’s it! All you have to do is ride.
As simple as we’ve made it to install and use, don’t be fooled into thinking that this not one of the most sophisticated systems you can buy for your Harley®. Using the supplied SmartLink software, you can adjust or monitor virtually every parameter of the system:
- Closed Loop AFR Targets
- Idle Speed
- Rev Limit
- Igniting Timing
- Speedometer Calibration
- Decel Pop Control
- Read Diagnostic Codes
- Running Statistics / Logs
- Accel Pump Simulation
- Start Fuel Pulse
- Engine Temp Alarm
- Injector Size Compensation
- Live Engine Tuning
- Live Monitoring
- Live Recording
- Digital Tech Compatible
- Nitrous Compatible*2
- Supercharger Compatible
- Warm-up Settings
- New – Map Analyzer feature assesses AutoTuned map adjustments in a snapshot to simplify map analysis
- New – AutoMap Creator feature speeds AutoTune mapping and improves the tune of any engine and exhaust pipe combination
- And Many More!
The ThunderMax makes more sense in the long run as the system can grow and change as your engine does—just load a new map! ThunderMax software, firmware and maps updates are accessible 24/7 with an Internet connection so you’re only a mouse-click away from the latest available data. The ThunderMax is designed and manufactured right here in the USA and backed by a 3-year warranty!
NEW! YouTube Video Instructions!
Links to Video Instructions:
How ThunderMax Works Click Here
Installation Part I 2002-2007 Touring Models Click Here
Installation Part II 2002-2007 Touring Models Click Here
Installation Softail® Models Click Here
Basic ThunderMax Set-Up (after installation) Click Here
Exhaust Oxygen Sensor Bung Installation Click Here
PigTail Communication Cable Installation Click Here
Customer Testimonials Click Here
Industry Testimonials Click Here
To order, call 410-379-0909
Orders received by 5pm E.S.T. ship same day!
This item qualifies for *** FREE GROUND FREIGHT *** in the lower 48 states within the USA!
Expert installation of this product is available at Zipper’s facility in Elkridge, Maryland. Transportation of your motorcycle to and from Zipper’s can be arranged if desired. Please call a sales representative for details.
To download free ThunderMax SmartLink IV software, Click Here!
To download ThunderMax installation manuals, Click Here!
*1 -- 2006 and earlier bikes require installation of oxygen sensor bungs in exhaust pipes
*2 – Except V-Rod® models
The products on this page are legal for sale in the State of California only for racing vehicles which may never be used upon a highway.
v.120907
|
| Description |
Part Number |
|
|
| ThunderMax Gen II EFI Module w/AutoTune modular combo, for ’01-'10 Big Twin equipped with cable-type Delphi EFI (not 2008-up Touring Models) - $899.95 |
# 309-360 |
 |
|
| ThunderMax EFI Module w/AutoTune for '08-Up XR1200® Models, includes PigTail Harness required for installation - $919.95 |
# 309-364 |
|
|
| ThunderMax EFI Module w/AutoTune for ‘07-’10 Sportster® Models - $899.95 |
# 309-365 |
|
|
| New! ThunderMax EFI Module w/AutoTune for 2010 XL/Sportster® Models, includes PigTail Harness required for installation - $919.95 |
# 309-385 |
|
|
| ThunderMax EFI Module w/AutoTune for ‘02-'10 V-Rod® Models - $899.95 |
# 309-366 |
|
|
| ThunderMax Gen II EFI Electronic Control Module Only (Open Loop Operation) - $485.00 |
# 309-340 |
|
|
| ThunderMax Gen II AutoTune Module kit, modular style (Adds Closed-Loop Operation to open loop ThunderMax ECM) - $413.95 |
# 309-350 |
|
|
| ThunderMax AutoTune Module kit, original style (Adds Closed-Loop Operation to pre-2007 Gen 1 open loop ThunderMax ECM, firmware version 3.2 or higher)*3 - $413.95 |
# 309-302 |
|
|
| ThunderMax Embroidered Hats - $15.95 |
# 017-200 |
|
|
| ThunderMax Short Sleeve Shirts, %100 Cotton, XL - Choose either Grey, Burgundy, Black, or White - $16.99 |
# 017-403 |
|
|
| ThunderMax Short Sleeve Shirts, %100 Cotton, XXL - Choose either Grey, Burgundy, Black, or White - $16.99 |
# 017-404 |
|
|
|
Home | High Performance Engines,
Kits & Products | Engines Ready
to Ship | Sale Items |
| Happening
| Heritage
| Tech Talk
| Talk to Zipper's
|
6655-A Amberton Drive Elkridge, Md 21075 410-579-2828 - phone 410-579-2835 - fax
Copyright 2000 by Zipper's Cycle, Inc. All rights reserved. No part of this website may be reproduced without permission.
This site is maintained by Zipper's Cycle, Inc. and CBIZ IT
|
