Setting
Currency
0 Item(s)

You have no items in your shopping cart.

Ignition Systems

  1. 01
  2. 02
  3. 03
  1. Be the first to review this product

    As low as: $216.50

    The Dyna 2000 is a digital EV ignition module with a host of unique features. Using a series of ‘dip’ switches, four different advance curves can be selected by the user to meet the needs of specific engine modifications or riding conditions, with or without the factory VOES switch.
  2. Be the first to review this product

    As low as: $78.95

    The Twin Tec External Ignition Module is designed to fit all Evolution Big Twins and Sportsters® to 1997. It mounts in the stock location and features many easy to program options. Two advance curve families with adjustable advance slopes can be programmed using the external dial switches, or you can plot your own curve using a PC with the optional software and cable kit. Rev limit is digitally set in 100 RPM increments and you can choose between single or dual fire operation, with or without multi-spark. It’s all housed within the compact billet housing that plugs into the factory harness on 1991 and later bikes; earlier models require a separate wiring harness. Backed by a one year warranty.
  3. Be the first to review this product

    As low as: $54.50

    Here’s a largely misunderstood part. The Vacuum Operated Electric Switch (V.O.E.S.) was standard equipment on all Evolution® engines and works in conjunction with most all late model electronic ignitions, both factory and aftermarket. It senses high and low manifold vacuum and signals the ignition to change its advance slope. Under high load, the switch signals the ignition module to electronically retard ignition timing to reduce the possibility of detonation. In low-load conditions such as cruising at light throttle, the ignition stays in the advanced mode for increased fuel economy and lower operating temperature. All controlled by the magical V.O.E.S. switch! Available with the switch activation pre-set to operate at 4, 5 or 6” of Mercury for your calibration requirements. If your pre-Twin Cam® engine doesn’t have one, it should.
  4. Be the first to review this product

    As low as: $349.95

    The Coil-Combo Digital Ignition is designed for use in custom bike applications where any engine equipped with a crank sensor (like a Twin Cam® or late EV) is going to be used. It consolidates all ignition components into a small, easy-to-mount package.
  5. Be the first to review this product

    As low as: $265.99

    Dyna Digital ignition modules are designed for carbureted bikes that incorporate J1850 data bus communications. These modules mount to the stock location and accept the factory harness plugs for a simple installation.
  1. 01
  2. 02
  3. 03
Loading...
Loading...