Setting
Currency
0 Item(s)

You have no items in your shopping cart.

Dyna Ignition Coils Double click on above image to view full picture

Dyna Ignition Coils

Be the first to review this product

As low as: $3.75

Price as configured: $0.00

Overview

Dyna’s ignition coils provide spark voltages in excess of 30,000 volts and spark energies second to none. Generally regarded as very powerful and virtually bulletproof, these coils are available in two mold shapes; replacement Harley® style or Dyna’s familiar post-mount type with angled plug towers. The post-mount coils are generally used on racers and require custom mounts or some fabricating. The 6 volt, 1.5 ohm coils work well on dual plugged engines running dual-fire ignition systems that require 3.0 ohms coils. When wired in series, the ignition reads the two coils as one 12 volt, 3.0 ohm coil.

Price as configured: $0.00

Details

What Coil Do I Need?
The many different ignitions available today can generally be used with a variety of different coil brands. Ignitions supplied on Twin Cam® and 2004-up Sportster® models are quite specialized and the factory coils supplied with them are also advanced and perform well in stock or performance applications.

Earlier (pre-TC) models with applications such as single or dual plug, and single or dual fire will affect which type of coil you may need to use. There are 3 basic types: O.E.M. Harley-Davidson® style coils which are shaped and mount like stock coils with two mounting holes and two wire outlets, typically used to upgrade dual-fire ignition systems. Next: There is the popular Dynatek post-mount coils which have a metal post that runs through the middle of the coil and has holes in each end for mounting; these coils require special mounting brackets to mount them properly. Last: Are the “two-in-one” coils for single-fire ignition systems that are actually two coils in one casing, made that way for easier mounting. These coils are generally slightly larger than stock, sometimes requiring special adaptors to retain the stock coil covers and can only be used on fully electronic (non-mechanical advance) ignitions.

You’ll notice that we list the ohms resistance for the coils we offer. It is important that the coil you select has the correct resistance as specified by your ignition system. Improper resistance can lead to module failure or malfunction. It is OK to use one manufacturers’ coil and another’s ignition module as long as the specs are compatible. How to decide which coil to use: see what type of coil is compatible with your ignition selection, then decide which mounting method would work best for you.

Here is a list of popular ignitions and their ohms resistance requirements:
  • Zipper’s Thunderbolt EV Ignition - 3.0 ohm
  • Original equipment points ignition - 5.0 ohm
  • ‘85-’99 Evolution® O.E. electronic - 3.0 ohm
  • Screamin’ Eagle® Evolution® modules - 3.0 ohm
  • Dyna ‘S’ ignition (street use) - 5.0 ohm
  • Dyna ‘S’ ignition (race use) - 3.0 ohm
  • Dyna 2000, 2000i - 3.0 ohm
  • Dyna 4000 (race only) - 0.7 ohm
  • Crane HI-4, HI-4E ignitions - 3.0 ohm
  • V-Thunder Controller & HyperFyre - 3.0 ohm
  • Spyke Ignition - 3.0 ohm
  • Compu-Fire ignitions - 3.0 ohm
  • RevTech Digital module - 3.0 ohm

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

Write Your Own Review

You're reviewing: Dyna Ignition Coils

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Price
Value
Quality

Additional Information

Brand Dyna®
Fuel / Air No
Model No
Engine Type No
Emissions Compliant No
Loading...
Loading...